3chi Disposable Vape Charging Instructions

Imagine you’re embarking on a road trip with your trusty disposable vape as your copilot. Just like a car needs fuel to keep going, your vape needs a charged battery to ensure a smooth and enjoyable experience.

But how do you go about charging it?

In this discussion, we’ll walk you through the step-by-step instructions for charging your 3chi disposable vape, ensuring you’ll never be left without a puff of vapor when you need it most.

So, buckle up and prepare to discover the secrets of keeping your vape charged and ready for action.

Checking the Battery Level

To check the battery level of your 3chi Disposable Vape, simply press the power button three times in quick succession. This will activate the battery level indicator, which consists of three different colored lights.

When you press the power button three times, the first light will illuminate if the battery level is above 70%. This indicates that your vape is fully charged and ready to use.

If the battery level is between 30% and 70%, the second light will turn on. This means that your vape is still usable, but it may be a good idea to charge it soon.

If the battery level is below 30%, the third light will light up. This indicates that your vape is running low on battery and needs to be charged as soon as possible. When you see the third light, it’s recommended to connect your vape to a power source and charge it until the first light turns on.

Connecting the Charger

To charge your 3chi Disposable Vape, you’ll need to connect the charger. Connecting the charger is a simple process that ensures your vape gets the power it needs. Start by locating the charging port on the bottom of the device. It’s usually a small, round opening.

Take the USB end of the charger and insert it into the charging port. Make sure it’s securely connected and fits snugly. You should feel a slight click when it’s properly inserted.

Once the charger is connected, you can plug the other end into a power source. This can be a USB port on your computer, a wall adapter, or a power bank. Ensure that the power source is working and providing electricity.

Once everything is connected, you’ll see a light indicator on the vape. This light indicates that the device is charging.

Leave your vape connected to the charger until it’s fully charged, which usually takes about an hour or two.

It’s important to note that you should only use the charger provided with your 3chi Disposable Vape to avoid any potential damage.

Charging the Disposable Vape

To charge your 3chi Disposable Vape, simply connect the charger to the device’s charging port. Once you have connected the charger, you’ll notice that the LED light on the device will turn on, indicating that it’s charging. It’s important to ensure that the charger is properly connected to the charging port to ensure a secure and efficient charging process.

During the charging process, it’s recommended to keep an eye on the LED light. When the light turns off, it means that the device is fully charged and ready to use. This usually takes about 1-2 hours, but it may vary depending on the battery level at the start of the charging process.

While charging your 3chi Disposable Vape, it’s important to avoid using it. Using the device while it’s being charged may cause damage to the battery or the device itself. For safety reasons, it’s best to wait until the device is fully charged before using it again.

Remember to disconnect the charger from the device once it’s fully charged. Overcharging the device may also damage the battery and reduce its overall lifespan.

Monitoring the Charging Progress

While your 3chi Disposable Vape is charging, it’s important to keep an eye on the LED light to monitor the progress. The LED light serves as an indicator to let you know how much charge your vape has accumulated.

When you first plug in your device, the LED light will typically start blinking. This indicates that the charging process has begun. As time passes, you’ll notice that the blinking becomes less frequent and eventually stops altogether. This signifies that your vape is fully charged and ready to use.

It’s crucial to pay attention to the LED light throughout the charging process, as it will give you an idea of how much longer your vape needs to charge. If the LED light continues to blink even after a significant amount of time has passed, it may indicate an issue with the charging process.

In such cases, it’s advisable to disconnect the charger and contact customer support for further assistance. Remember, monitoring the LED light is essential to ensure that your 3chi Disposable Vape is charged properly and ready for use.

Disconnecting and Testing the Vape

After the 3chi Disposable Vape is fully charged, it’s time to disconnect the charger and test the functionality of the device.

To disconnect the charger, simply unplug it from the power source and remove it from the vape. Make sure to handle the vape with care and avoid dropping it or applying excessive force.

Once the charger is disconnected, you can proceed to test the vape’s functionality. Start by taking a few gentle puffs to ensure that the vape is producing vapor. If you notice any issues such as a weak or nonexistent vapor production, it may be necessary to troubleshoot the device.

First, check if the vape is properly assembled and all components are securely in place. If everything seems to be in order, try adjusting the airflow by rotating the mouthpiece or removing any obstructions. If the issue persists, contact the manufacturer or refer to the user manual for further assistance.

It’s important to test the vape after charging to ensure that it’s working properly and ready for use.


In conclusion, properly charging your 3chi disposable vape is essential for a satisfying vaping experience. By following the simple instructions provided, such as checking the battery level, connecting the charger correctly, monitoring the charging progress, and testing the vape after disconnecting, you can ensure that your vape is always ready to use.

Remember to always refer to the specific instructions provided by the manufacturer for the best results.


Leave a Reply